Here is a HOT WATER HEATING COIL that can be installed inside all stoves burning Wood Pellets, Corn, Coal, and Wood Logs and will heat your domestic hot water in bathrooms and kitchens. This U shaped stainless steel tube, 3/4 inch diameter, is placed inside the combustion chamber of the stove by using a INSTALLATION KIT which contains a hole saw, pressure relief valve, etc. This U-Shaped Coil is 18 inch long and has mounting nuts, washers, and gaskets. There are other Models that have either U or M shaped design that vary in lengths 16, 18, 21, 24 inches long. All these models are shown in a second picture in the picture section. Contact us for prices.
There are three kinds of installation configurations with instructions for each. (1) Hot Water Tank is 10 feet or less from the Stove using the thermo-siphon method of water flow; (2) Hot Water Tank is over 10 feet from the Stove and a 2nd tempering tank is required, still using thermo-siphon water flow; (3) A Circulating Pump is required. This method is used when the hot water heater tank is more than 10 feet away from the stove and a tempering tank is not available, or the stove is on a higher level than hot water heater tank. Written instructions are supplied for all three configurations.
To make an Order, for questions, comments contact: Richard H. Dodge, Corn Stoves of Iowa, Dealer, 1312 1st Avenue, N.W., Cedar Rapids, IA 52405, 1-319-298-0500, FAX contact us to turn FAX on), E-mail: [email protected]
See our other stoves, furnaces, boiler, and fireplace inserts in this website.
PICTURE Descriptions ... left to right
HOT WATER HEATER
All homes have a hot-water heater and the option exists to install a hot-water coil into your stove and supply hot water for domestic use in the bathroom and kitchen. Do not forget that you spend energy heating your hot water heater and you can save money there if you buy our unit. Thorough Instructions make it simple to install. You will receive instructions in the Operators Manual and Technical Instructions on how to do this.
There is a Limited Lifetime Warranty this product. We warrant the stainless steel heat exchanger coil to be free from defects in materials and workmanship from the date of purchase by the original owner. If, during the warranty period, the stainless steel heat exchanger should burn out for any reason other than obvious intentional misuse, it will be replaced with a new one when returned, postpaid, with proof of purchase. We make no warranty covering personal injury which may occur during the use of this product.
RETURNS and SELLER PROTECTION
Seller will allow return items if done within 14 days after purchase and returns must be paid by the buyer for both shipping and insurance. Item must not have been opened, used, or in a condition other than the one we sent to the buyer. ... If an exception is granted, the item must be repackaged and insured by the buyer so the shipping agent will not damage the product upon return. If item is defective and/or damaged in shipment by the Freight Carrier, the seller may elect to either exchange item, replace item, or adjust the price to compensate for damage.
LEGAL JURISDICTION RESIDES WITH SELLER
The seller (dealer) resides in Cedar Rapids, Linn County, Iowa so legal jurisdiction remains with the seller's home base. Accordingly the parties (seller and buyer) consent to the exclusive jurisdiction of the federal and state courts located in Linn County, Iowa, in any action arising out of or relating to this sales description and agreement. The parties waive any other venue to which either party might be entitled by domicile or otherwise. If the seller is forced to incur legal fees and court costs to enforce this agreement, then the buyer will pay for them.
SHIPPING
Customer may pick this item up in person or have it shipped by UPS, USPS, or Fed Ex Freight. Check it for DAMAGES before you sign, otherwise your insurance claim may be denied.
SPECIFICATIONS
Item is made of 304 Stainless Steel 3/4" diameter Schedule 40 Pipe. Product meets EPA requirements for portable water. It also meets and exceeds ASME, ASTM, and US boiler code requirements.
